Product Description
Mobil Brake Fluid DOT 4 is an extra high performance hydraulic brake fluid for use in automotive disc, drum and anti-skid brake systems and clutch systems.
Typical properties vary depending on the supplier of the fluid. Typical properties for brake fluids include: Density at 20º C, boiling point, wet boiling point, flash point, and viscosity at "40º and "100º C. Use Brand approval data with the local filling.
Features and Benefits
Mobil Brake Fluid DOT 4 is based on polyethylene glycol ether technology to provide the highest level of brake and clutch performance in modern as well as older model automotive and commercial vehicles. Key features and benefits include:
Özellikleri |
Avantajları ve Sağlayabileceği Faydalar |
High boiling point |
Consistent and safe brake performance under severe braking pressure |
Minimum rubber component swell |
Reduces leakage and loss of fluid to a minimum |
Excellent corrosion protection |
Extended life and reliability of brake system components |
Applications
Mobil Brake Fluid DOT 4 is suitable for all disc, drum and anti-skid braking systems used in average to high performance vehicles requiring DOT 3 or DOT 4 level performance. Recommendations for use include:
* Use only in its concentrated form out of a previously unopened or well sealed container
* Always seal the container immediately after use as the fluid absorbs moisture from the atmosphere quite rapidly; this will reduce service life significantly.
* Never reuse drained brake fluid.
* Brake fluid can affect the vehicle paintwork, so remove spills immediately without rubbing.
* Brake fluid should be drained from the vehicle every two years or 40,000 Km (24,000 Miles) and refilled.
* Check Owners Operators Manual for details.
Specifications and Approvals |
|
Mobil Brake Fluid DOT 4 meets or exceeds the following industry specifications: |
FMVSS 116 DOT 4 |
|
FMVSS 116 DOT 3 |
|
SAE J1703 |
|
ISO 4925 |
|
|